1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 a-frame and blade on MM1 "headset"

Discussion in 'Fisher Engineering Discussion' started by JFon101231, Nov 16, 2011.

  1. JFon101231

    JFon101231 Senior Member
    from CT
    Messages: 423

    I think this is possible but want to confirm:
    I can take a MM1 style headset with the 2 separate pins and mount an a-frame that carries a MM2 blade, correct?

    Thanks - Jeff
     
  2. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,239

    As long as your mounting the a-frame with the blade then it should be fine.If you compare the a-frames and center pin from the mm1 and the mm2 they are different.

    http://parts.fisherplows.com/
     
  3. JFon101231

    JFon101231 Senior Member
    from CT
    Messages: 423

    Right, the a-frame and blade are both MM2. Only the upright w/ the headlights and pump etc. is MM1.