1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mm1 problem

Discussion in 'Truck & Equipment Repair' started by brent350, Jan 7, 2016.

  1. brent350

    brent350 Junior Member
    Messages: 1

    i have a mm1 8 foot straight blade, blade will go down and the solenoids are working for the angle left and right and up,but the moter wont come on to turn pump! I have replaced the solenoid under the hood but the problem is there is no ground to it to turn it on. there is no break in the wire and i even tried a different controller,where does the plow gtet its ground from? I havejumped a ground wire to the black wire on the conroll and the pump will start!
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,750

    How many pins are at the solenoid?
  3. Randall Ave

    Randall Ave PlowSite.com Addict
    Messages: 1,441

    Put a pic up of the solenoid.