1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mm1 blade won't go all the way down

Discussion in 'Truck & Equipment Repair' started by broy4709, Jan 3, 2010.

  1. broy4709

    broy4709 Junior Member
    from mass
    Messages: 3

    used my fisher mm1 plow a couple of times no problem. used it today and blade would not go down at all. I found a bad connection that fixed that problem but now the blade will not go all the way down. It's about 3 inches from the ground any ideas. thanks
     
  2. tracer22j

    tracer22j Junior Member
    Messages: 10

    does it go left and right all the way still could have a bad connection on the up and down wires thats what happend to minie
     
  3. broy4709

    broy4709 Junior Member
    from mass
    Messages: 3

    yes it moves up left right no problem. I'm going to replace the connection thanks for the reply
     
  4. tracer22j

    tracer22j Junior Member
    Messages: 10

    is that the 3 wire one i just cut mine and hooked them direct to make sure
     
  5. broy4709

    broy4709 Junior Member
    from mass
    Messages: 3

    yes it is my buddy put it on for me he's gonna check the wiring