1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM 2 and MM 1 interchangeable?

Discussion in 'Fisher Engineering Discussion' started by kyle35060, Nov 27, 2010.

  1. kyle35060

    kyle35060 Junior Member
    from RI
    Messages: 8

    Will a MM 2 straight blade work with a MM 1 straight blade set up? I want to put a 9' HD MM 2 in place of a 8 1/2' HD MM 1 that's on the truck, without changing any thing. Thank You
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    The blade will fit on the push plates. If the truck is a two plug, and the plow is a three plug, you will need to change one or the other.
     
  3. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Are you talking about changing just the blade itself, and not the A Frame and headgear, or are you thinking about buying a complete MM2 plowside setup?
     
  4. kyle35060

    kyle35060 Junior Member
    from RI
    Messages: 8

    A complete MM2 plowside setup and they are both three plug set ups.
     
  5. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Then your good to go.
     
  6. buddymanzpop

    buddymanzpop Senior Member
    Messages: 599

    Any three plug straight blade off truck set up will work on any truck with a three plug straight blade truck side set up.
     
  7. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Ah'yup, that there is a true statement.
     
  8. kyle35060

    kyle35060 Junior Member
    from RI
    Messages: 8

    Thank you for the help