1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mm 1 super slow unless revving

Discussion in 'Fisher Engineering Discussion' started by allagashpm, Jan 30, 2015.

  1. allagashpm

    allagashpm Senior Member
    Messages: 703

    So an older friend of mine has a mm 1 on a 95 ish chevy diesel 3500. The plow is moving wicked slow in all directions left right up whatever. Fluid is checked and full, truck is in good shape new bats and alt etc. As soon as he revs the engine while moving the plow it acts like it should. It will be creeping then hit the gas and it moves fast.
    I am at a loss he plowed for 8 hours what usually takes him 2-3.
    Any suggestions or advice would be very appreciated! Thank you in advance.
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,661

    Wrong pulley on alternator, cheap alternator, bad tensioner, bad connections or crap battery. Check voltage with motor idling. Should be between 13-14 volts.
     
  3. NHresident

    NHresident Senior Member
    Messages: 285

    the pumps gone bad
     
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,971

    What's the volts?