1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Minute Mount 1 issues

Discussion in 'Fisher Engineering Discussion' started by Orgnoi1, Dec 8, 2013.

  1. Orgnoi1

    Orgnoi1 Junior Member
    Messages: 3

    Hey guys maybe someone can shed some light...

    Plow worked fine last season... Hooked it up and it's acting funky... When you lift it's going left... A local shop went through all the solenoids... They all supposedly are fine....

  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,166

    S2 not shifting. Lt green wire.
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,746

    Ck gnds. And then ck the pwr to that s2 that kimber mentioned
  4. gtmustang00

    gtmustang00 Senior Member
    from Berlin
    Messages: 745

    I would swap the controller with a known good one.
  5. Snow Commandor

    Snow Commandor Senior Member
    from 07666
    Messages: 438

    Wires could be chewed away by mice, cousing 2 or more wires to be crossed. pins in the connector could be corroded. make sure all connections are clean & greased.