1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers ST-7 moldboard

Discussion in 'Meyer / Diamond Products Discussion' started by Top, Feb 2, 2016.

  1. Top

    Top Junior Member
    Messages: 10

    I have ST-7 Meyers Plow that needs a new moldboard. The frame is good shape the Moldboard has few holes in it from rust but other wise the frame is all okay. I know Meyers no longer sells just the skin for this Plow. Is there somewhere that can fabricate the skin? I can do all the welding. We have a machine shop locally but they can't roll the metal without leaving several creases.
    Thanks
    Mike
     
  2. Banksy

    Banksy PlowSite Veteran
    Messages: 3,113

  3. Nascar24

    Nascar24 Senior Member
    Messages: 645

    Contact Smith Bros in NJ, he'll have Moldboard reskin available
     
  4. jasonv

    jasonv PlowSite.com Addict
    from kannada
    Messages: 1,114

    If you don't mind a little diy... if you can get your hands on an old 200 gallon furnace oil tank, the curve on them is just a little bit smaller of a radius than a snow plow. Note that they're a little bit shorter too, so you'll need to use two pieces -- one from the bottom of the tank, and an extension from the top. Weld one side of the metal in place, then CLAMP the other side down to conform to the plow frame, and weld the second side down.
     
  5. fhafer

    fhafer Member
    Messages: 66

  6. Top

    Top Junior Member
    Messages: 10

    Thank you Smith Brothers does make them
     
  7. fhafer

    fhafer Member
    Messages: 66

    I thought Smith Bros wouldn't sell moldboard skins... they only installed them.
     
  8. Top

    Top Junior Member
    Messages: 10

    Sorry I made a typo Smith Brothers "doesn't" make skins.
    Thank you for correcting me.

    Mike
     
  9. plowsteve

    plowsteve Junior Member
    Messages: 12


    + 1 on the Storks skins. They are high quality
     
  10. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,432

    will a pro 6038 blade fit you frame?...7.5ft
     
  11. Top

    Top Junior Member
    Messages: 10

    I am not sure is it for a Myers ST 7
     
  12. Pushin 2 Please

    Pushin 2 Please PlowSite Veteran
    Messages: 4,575

    Meyer. Not Meyers.
     
  13. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,432

    i have a myers st 7.5 sitting in the barn, it was a backup but just picked up a new truck with western, selling the 90 with the current st 7.5 plow so dont need it anymore
     
  14. Top

    Top Junior Member
    Messages: 10

    Where are you located and is this the whole plow or is it a Skin?
    Thanks
     
  15. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,432

    14020, plow and "a" frame, needs pivot pins

    looks like this, this is the one on truck, its when i made the gravel guard for it

    1129121233.jpg

    1129121233.jpg
     
    Last edited: Mar 8, 2016
  16. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,432

    will try and get a pic of it later if interested
     
  17. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,432

    too far or have not been back?