1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers question (water in pump)

Discussion in 'Commercial Snow Removal' started by redvetracr, Dec 15, 2003.

  1. redvetracr

    redvetracr Junior Member
    from WI
    Messages: 24

    I have a Meyers plow thats almost 20 years old (E-47 pump). I ONLY plow my driveway and the plow sits on the truck year around. Question is!! I always seem to have some water in the pump but I have NO leaks, how is this possible?? And yes I am
    using the correct Meyers fluid. THANKS IN ADVANCE!!
  2. roblandscape

    roblandscape Senior Member
    from Phila
    Messages: 187

    I would replace the top seal, around the piston. It is very eay to do, just make sure you replace the gaskets that you remove for the installation LLLLLLLLL
  3. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Replace the fill plug/vent cap also.
  4. SnowLane

    SnowLane Senior Member
    Messages: 125

    Water will enter all hydraulic systems through condensation that is why it is important to flush your system atleast once per year.