1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

meyers plow

Discussion in 'Commercial Snow Removal' started by PLOWMAN45, Aug 12, 2003.

  1. PLOWMAN45

    PLOWMAN45 2000 Club Member
    Messages: 2,815

    anyone know the size of the bolts thats hold the ram cylinders,and the main bolts i wanna tighten them up to give me that solid feeling and i only go up to 1 1/8 in socket and 13/16 in wrench and i know its something bigger ty :help:
  2. snowplowjay

    snowplowjay Banned
    Messages: 890

    My two bits of advice are check your manual and secondly send Meyer an email at: info@meyerproducts.com.

  3. Garagekeeper

    Garagekeeper Senior Member
    Messages: 459

    Mounting Bolt For Cylinders

    Chris the mounting bolts for the angling cylinders on your Meyer should be 5/8 x4" which would require a 15/16" wrench and socket to remove or install.
    Both would be a good addition to your plow service tool box.
    :rolleyes: John........