1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

meyers plow wiring on a jeep

Discussion in 'Truck & Equipment Repair' started by gldi8r, Dec 24, 2006.

  1. gldi8r

    gldi8r Junior Member
    Messages: 2

    new to the group,
    i have a late 70's jeep j10 truck with a basket case plow set up on it. the plow was on it and working at one point. when i bought the truck it was apart. i pieced it all back together and am at the wiring point. i have the inside controls it is a two toggle switch panel, up/down, angle left/right. wiring at the grill has been cut. and i have a relay that is not attatched to anything, and three bullet conectors at the plow pump. red, green and black wires. if i put power to the pump it runs. does anybody have a wiring schematic for a set up like this?
    thanks
     
  2. fernalddude

    fernalddude PlowSite.com Addict
    Messages: 1,105

    Like this this is the e-47

    wires 47 (Medium).jpg
     
  3. fernalddude

    fernalddude PlowSite.com Addict
    Messages: 1,105

    Pump side hope this helps....

    47 -pump (Medium).jpg
     
  4. gldi8r

    gldi8r Junior Member
    Messages: 2

    thanks

    thanks for the schematics.