1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers lowers slowly when I'm driving?

Discussion in 'Commercial Snow Removal' started by steve b, Dec 6, 2002.

  1. steve b

    steve b Member
    Messages: 36

    Bought a used 7 1/2 Meyers. Blade slowly drops as I'm driving. What do I have to replace/adjust?
  2. Garagekeeper

    Garagekeeper Senior Member
    Messages: 459

    Meyer Drops

    Steve I would try and clean the "A" valve which is located on the back of the power unit in the housing. It should have a screen over the port but spray it with some Wd-40 and compressed air. If it still drifts down the valve still could be the problem, but the cup on the bottom of the ram could be bad too. The cup would be the least expensive to replace but the hardess too. John
  3. Got Grass?

    Got Grass? Senior Member
    Messages: 641

    Do what Garagekeeper said but also check the hoses for a slow leak. Low on fluid will give it away.