1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers E60 Top Cover

Discussion in 'Truck & Equipment Repair' started by 1976 Ranger, Jan 18, 2007.

  1. 1976 Ranger

    1976 Ranger Junior Member
    Messages: 29

    This is the second time in two years. The top cover and seal assembly has cracked on me. Fluid is changed annually. I have never found ice in fluid. Has anybody had this problem before? Fluid is always full. Both times its happened its been after a heavy plow. Any help is appreciated.
    David
     
  2. Sydenstricker Landscaping

    Sydenstricker Landscaping PlowSite Veteran
    Messages: 3,882

    There is a thread in this forum just recently under what happened and is it fixabel?. I have never had that happen before to me. Sounds like it may be a pressure issue.
     
  3. LON

    LON Senior Member
    Messages: 749

    check pump pressure and make certain it is at 2500psi. It is more than likely up around 3000psi.
    Lon
     
  4. StorksAuto

    StorksAuto Senior Member
    Messages: 186

    Yes this is a common problem with the E-60 people have the presure to high the top cap cant take it. People often do this stacking and hit the up switch there is no weight on the lift ram so it shoots up and starts to crack the tor cap.