1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers A frame with angle cylinders

Discussion in 'Used Plowing and Truck Equipment Forum' started by cj7plowing, Nov 14, 2009.

  1. cj7plowing

    cj7plowing Senior Member
    Messages: 379

    I have a A frame off a 7'6" plow with the angle cylinders and chain. The pistons have very minimal pitting and well with in reason of use.
    I can add pics later if interested.


    local pick up in NJ 07740

  2. cj7plowing

    cj7plowing Senior Member
    Messages: 379

    pics added

  3. zippoz

    zippoz Member
    Messages: 64

    how far apart are the square ends of the a frame from outer edge to outer edge.
  4. plowin4u

    plowin4u Member
    Messages: 99

    What is measurement from bolt in sector to back bar on a frame? where in jersey are you located?what town?
  5. cj7plowing

    cj7plowing Senior Member
    Messages: 379

    sorry guys for taking so long to get back to you

    the measurement between the square end that mount to the truck are 24 3/4 on the out side

    the measurement between the pins to mount to the moldboard are 33 1/2

    the measurement length overall top tp bottom is 43 1/2

    I am in Long branch 07740