1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer Plow Help

Discussion in 'Truck & Equipment Repair' started by MT79, Feb 15, 2006.

  1. MT79

    MT79 Junior Member
    Messages: 8

    Hi gang, I have been plowing my driveway with an old Meyer plow on my 79 F250 without trouble for 10 years. I believe it is the E47 pump. The plow stopped working with no power to the motor at all. I found that the plow side post of the motor solenoid melted right off so I replaced the solenoid. Now the only action I can get out of the plow is to raise/lower the blade and this can be done only when the ignition key is in the off postion. All of the wiring seems to be in order otherwise. Any suggestions would be greatly appreciated. Thanks, Marty
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,990

    Check your wiring. You have something screwed up somewhere. Be particularly aware of grounds.