1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer E60 goes down slow leakes

Discussion in 'Meyer / Diamond Products Discussion' started by tropheus, Dec 3, 2008.

  1. tropheus

    tropheus Junior Member
    from Barrie
    Messages: 9

    I had to rebuild part of this pump new electric motor new C valve new side Rams new hoses new coupler I put new o rings on the lift cylinder now it wont stay up it slowly go down and leak out of the top
    did I ad a o ring where it didn't need one at the top where there is a washer
    Thanks for looking
     
  2. wild bill

    wild bill PlowSite.com Addict
    Messages: 1,239

    e-60

    did you replace the lift ram cup packing or seal at the bottom ,also?
     
  3. tropheus

    tropheus Junior Member
    from Barrie
    Messages: 9

    Hi Wild Bill
    I used B packing cup in place of 11 wiper
    so i guess i need a new seal kit
    Thanks Wild Bill
     
  4. tropheus

    tropheus Junior Member
    from Barrie
    Messages: 9

    I took it apart and know what you mean just a question when i put it together there is a bit of oil in the bottom can i just slide it in
    or does that chamber need to be dry how do you get the air out
    Thanks
     
  5. rocknrollrednec

    rocknrollrednec Senior Member
    Messages: 108

    you want it all covered in oil as it goes back together anyways...
    and don't worry about any air. it'll bleed itself pretty quick as you test it once it's back together
     
  6. tropheus

    tropheus Junior Member
    from Barrie
    Messages: 9

    Thanks rocknrollrednec
     
  7. tropheus

    tropheus Junior Member
    from Barrie
    Messages: 9

    Changed packing cup and it works good
    thanks to all who replied