1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

meyer e47 not have straight down option

Discussion in 'Truck & Equipment Repair' started by dts, Nov 25, 2009.

  1. dts

    dts Junior Member
    Messages: 9

    does all meyer e 47 only go down and to the right when hooked up??? side to side fine but seems like the black wire needs a extra wire out of the solonoid becuse when hooked up push the down botton it goes down and right ... HELP s
     
  2. Deco

    Deco Senior Member
    Messages: 453

    how old is the pump ? does it have 1 celonoid or 3 "? should be 3 ...red ,green and black.check celonoids and wiring .
     
  3. WeDoSnowplowing

    WeDoSnowplowing Senior Member
    Messages: 160

    Picture of the pump would be helpful.
     
  4. dts

    dts Junior Member
    Messages: 9

    yes

    has three wire black red green
     
  5. dts

    dts Junior Member
    Messages: 9

    how do you upload picture???
     
  6. WeDoSnowplowing

    WeDoSnowplowing Senior Member
    Messages: 160

    Click on Go Advance The be Additional Options below Submit reply, Preview Post Spell Check. Attach Files area Click on Manage Attachments upload window will come up. Does it look like this? A coil & Valve is on the side, B & C coils & Valves are on top.

    73d273e730750e9a.jpg

    0038142b710028a8.jpg
     
    Last edited: Nov 25, 2009
  7. Meyerman

    Meyerman Junior Member
    from Seattle
    Messages: 5

    Check your C solenoid. It may be partially open.
     
  8. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    why?......
     
  9. dts

    dts Junior Member
    Messages: 9

    yes its a e 47 meyer
     
  10. WeDoSnowplowing

    WeDoSnowplowing Senior Member
    Messages: 160

    Some power / pump units do not have B & C coils & valves. They just Raise & lower / float. Angle blade by hand.
     
  11. Crash935

    Crash935 2000 Club Member
    Messages: 2,377


    Wedoplowing, trust me, he knows more about the meyer pumps than you will ever know so he doesnt need a picture.
     
  12. WeDoSnowplowing

    WeDoSnowplowing Senior Member
    Messages: 160

    Well my grandfather (95 years young) has an old meyer it just raise & lowers Float Need to move the angle by hand. He too cheap to buy a valve body for the upgrade.
     
    Last edited: Nov 25, 2009
  13. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    If you would have read DTS's answer you would have see that he has the 3 wires meaning it a 3 valve pump whcih has angle functions.