1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer E-47 pump only works when it wants to

Discussion in 'Truck & Equipment Repair' started by dirtyscag, Jan 26, 2011.

  1. dirtyscag

    dirtyscag Senior Member
    Messages: 121

    I have a 7.5 foot meyers plow with the E47 pump and it only works when it wants to. The other day i was doing a job and it was working fine went to put it up and it wouldnt go so i chained it up and went home then hit the switch and it worked for a bit then stopped again. I replaced all the wire and everything else from the battery to the pump since it was really old. Then changed the fluid and filters. I also replaced the solinoid too. Am i missing somthing simple or is it the motor?
     
  2. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    bad connection somewhere.
     
  3. dirtyscag

    dirtyscag Senior Member
    Messages: 121

    Thanks i will give that a try
     
  4. dave_dj1

    dave_dj1 Senior Member
    from NY
    Messages: 350

    If you have toggle switches, check them for loose or corroded connections.