1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

meyer crossover relieve valve

Discussion in 'Truck & Equipment Repair' started by HUSKER POWER, Feb 14, 2009.

  1. HUSKER POWER

    HUSKER POWER Junior Member
    Messages: 4

    anybody have a trick to getting the needle sleeve out of the valve body on a E60 pump?
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    On the really stuck ones- a long low grade (ie soft) wood screw, a pair of vise-grips and a screwdriver to pry on the vise-grips.
     
  3. HUSKER POWER

    HUSKER POWER Junior Member
    Messages: 4

    I tried to screw a screw in and could not get it to come out so I took the lazy way and put everything new in after that point and it seems to be working great now except I think it is ajusted to tight
     
  4. WeDoSnowplowing

    WeDoSnowplowing Senior Member
    Messages: 160

    So is this problem fixed? 11-17-2009
     
  5. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Seven months ago he said " it seems to be working great now". I think he's OK.
     
  6. WeDoSnowplowing

    WeDoSnowplowing Senior Member
    Messages: 160

    I just went down to fast. Missed it