1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Mack Dump Trucks with Plows

Discussion in 'Heavy Equipment' started by DelValSnow, Jan 16, 2011.

  1. DelValSnow

    DelValSnow Junior Member
    from PA
    Messages: 2

    Ive got a 2006 Mack Granite CV713 Tri-axle that i have had since new. I dont use it a ton just for hauling equipment and moving large amounts of materials and salt in the winter. Im looking at putting a plow and salt spreader on it . Got any pics of yours and suggestions of brand of plow and spreader to put on it
     
  2. Jelinek61

    Jelinek61 Senior Member
    Messages: 679

    Go to the DPW truck thread. There is a ton of Macks in their from NYSDOT
     
  3. LON

    LON Senior Member
    Messages: 749

  4. DelValSnow

    DelValSnow Junior Member
    from PA
    Messages: 2

    I live in south east Pa but we plow all around eastern PA
     
  5. matteo30

    matteo30 Member
    Messages: 43

    A lot of guys around here used bumper to axle plow frames with air pistons on their tri axles. If you want a sander in it as well most guys go with the clutch pump of the motor. Seems to work well
     
  6. LON

    LON Senior Member
    Messages: 749

    Bumper to axle hitches should only be used on trucks below 28,000#GVWR as recommended by manufacturer.
     
  7. SMLCAT

    SMLCAT Member
    Messages: 85