1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Looking to complete my 8' Pro Plow setup

Discussion in 'Western Plows Discussion' started by kmollanketo, Jan 9, 2010.

  1. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    Ok. So I have an 8' Western Pro blade, 11 pins on one connector, 2 pins in the other...and a 2000 GMC 3500 classic pickup. Anyone have any ideas on where's the best place for me to go an get me some things I need to hook 'er up on my rig? I need the mount, wiring, the works...
     
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Did you try any of the sponsors here like Equip Specialists or CPW? Can also try No Lead (kip) at Arista Truck here in GR and have thiem shipped up to you.
     
  3. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    Tried those links, haven't found what I'm looking for yet...if anyone has the mount and wiring I need please be sure to let me know!
     
  4. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Looking for Uni or ultra mount? Are there 2 plugs or 3 plugs on the plow? With the 11 pin there should be 3.
     
  5. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    I'm not even sure what the difference is. But I counted 11 and 2 pins in the connectors coming from the plow
     
  6. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    Might be an ultra, with 11pin harness, (two wire) battery leads???
     
  7. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    Yeah I do think I recall seeing ultramount somewhere on the side of it before, I havent looked at it since summer and now we have 4 feet of snow lol
     
  8. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

  9. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    I basically need everything except for the plow, lights, and the two harnesses that are coming from the plow. I don't know what these isolation modules and everything else are?
     
  10. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    Ok. The plow says ultramount on it, it's an 8' pro plow by western. I recounted the plugs and one of them has 11 pins in it, the 2nd has 2 bigger pins in it, and a 3rd at the bottom of the frame has 11 holes in it. It looks to have 4 trip springs and a shock absorber. This is going on a 2000 GMC 3500 classic body style.

    IMG_1575.jpg

    IMG_1576.jpg

    IMG_1577.jpg

    IMG_1580.jpg

    IMG_1582.jpg
     
  11. sno commander

    sno commander PlowSite.com Addict
    from ct
    Messages: 1,061

    a western dealer will hook you up
    fyi your mising the cover that goes over the coils, that area needs to stay clean :drinkup:
     
  12. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    in the second photo your holding the plow harness, what is the part number?? Your also holding the battery cable the goes to the plow, do you have the other half that goes to the vehicle battery??

    Do you have a 3 port, 4 port, or relays?? If it a 3 or 4port mod, what number and color??

    In the third photo you are holding the Vehicle harness, what the part number?
    How many harnesses do you have?
     
    Last edited: Jan 11, 2010
  13. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    The plug with the two prongs (right plug in in the top right photo) has 21294 molded into the rubber of the plug. Neither of the other two have any numbers on them anywhere, the white tags only say to make sure to grease the connections...

    Those are the three plugs coming from the plow, I have nothing on the truckside portion
     
  14. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    It's just a standard issue 3 plug Isolation system. Just need a 3 or 4 port truck side setup to complete the system.
     
  15. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    Does anyone have that for sale? :]
     
  16. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    2COR has some of it for sale in the used section. http://www.plowsite.com/showthread.php?t=95410

    The rest can be purchased new from anyone who carries Western or Fisher parts.
     
  17. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    I'm guessing I'll need his 29060 and 26357?

    And does what vehicle the 3 port iso box came from matter or are they universal?

    What's the difference between HB3/HB4 and 2B?
     
    Last edited: Jan 11, 2010
  18. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Yes you can use his Iso and 26357 11 pin harness. You then just need a control harness (26345), a battery harness (63411), the short positive cable (22511), and a motor solenoid.

    The Iso's are specific for certain applications but his will work on your truck.

    HB3/HB4 and 2B are the headlight styles available on your year of truck. HB3/HB4's are the plastic composites and the 2B's are the glass sealed beams and you have to purchase the correct plug in harness for your trucks lamp style to complete the truck side plow harness. 2B's take a 29234 and the HB3/HB4's take a 28253.
     
  19. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    One more post and you can PM. Then I can get your info if you want my parts.
     
  20. kmollanketo

    kmollanketo Junior Member
    Messages: 15

    My truck has the wide, over/under headlamp assembly. Is that hb3/hb4?