1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Looking for unimount pump, controls, needed wiring

Discussion in 'Used Plowing and Truck Equipment Forum' started by birddseedd, Jul 18, 2013.

  1. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    Looking for unimount pump, controls, needed wiring

    269.352.0043

    thanks

    mike
     
  2. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    i have a fisher sehp pump if that would work for you
     
  3. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    sure would. how much?
     
  4. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    400 if you look a little lower i have it listed
     
  5. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    deal. ill get back with ya after my route is done.
     
  6. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    I have a question tho. iv never worked with electronic controls. what do I need to make them work? 04 dodge RAM. my lights are hardwired to my battery so I'm not worried about them. can I run a hot wire to the fisher controls to make them work? or do i need a wiring harness? thanks for the help
     
  7. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,419

    making a harness wont be easy. You can get a control harness alone with out the Lighting portion.

    I just bought his control harness for my pump conversion
     
  8. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    does it require a computer type control box?
     
  9. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,419

  10. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    hmm. that circutry I could not reproduce. what all do i need for this? pump. controls. 6 pin controller?

    does the controller have a wiring harness to the truck? how does that part work?
    Ty for the help
     
  11. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,419

    controller is separate from the harness.

    SO its truck side plow side then the controller.
     
  12. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    so what parts will I need for the conversion?
     
  13. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    truck side harness (computer built in?), handheld controls, plowside harness (which would be part of the pump?)?
     
  14. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,419

    No computer Just the wires

    SO you need the harness on the truck side that goes to the solenoid and the controller and then the plow side that connects to all 3 solenoids to the truck side harness
     
  15. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    so if I have generic 6 pin male and female connectors I could just wire it in if i knew which wire went where?
     
  16. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,419

    I thought of making the harness my self. But its way too much work. IF you get the Unimount manual they have wire diagrams that you can follow.
     
  17. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    are all of the wires clearly marked? just straight throulgh connections right?

    would be nice to add fisher to my plethera of hobbled together plow parts
     
  18. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516

    There are quite a few manuals for fisher. i am familiar with what western manuals are what, but not fisher. can you point me in the right direction?

    thanks
     
  19. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,419

    they are the same system. I have a fisher harness on a western pump
     
    Last edited: Jul 18, 2013
  20. birddseedd

    birddseedd PlowSite Veteran
    Messages: 3,516