1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

looking for help wiring buyers speed controler

Discussion in 'Arctic Sectional Sno-Pusher' started by brianslawncare, Dec 3, 2007.

  1. brianslawncare

    brianslawncare Junior Member
    Messages: 22

    i have a buyers salt spreader controller and im unsure or the wiring. there are two heavy guage wires (red in color) and one smaller (blue) wire on the back of controller. the small blk wire is connected to a small screw underneth.i know the blk is the ground. what do the other three go to? the model# is #0105. thank you
  2. 6feetdeep

    6feetdeep Senior Member
    Messages: 141

    One of the reds is power out to the salter, The other should be fused and go to the battery positive side (power in, to run the salter) , the blue wire should be 'keyed power' from the fuse panel (hook to something that is turned on/ off by the ignition key)
    hope it helps