1. Welcome to PlowSite. Notice a fresh look and new features? Explore this quick video tour of updates and enhancements. It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

looking for 7.5 Fisher plow skin

Discussion in 'Fisher Engineering Discussion' started by 1bohica, Dec 17, 2005.

  1. 1bohica

    1bohica Junior Member
    from MA
    Messages: 25

    have RD 7.5 Fisher moldboard skin is in rough shape (to be kind) have been looking for a Moldboard plow skin for 2 years, have called Fisher and they say they do not sell them (would rather sell a new plow??). Any one have a source, hopefully it is "pre shaped"?? Welders down here are fussy and want to replace it with something close. (Brockton, MA):confused: :dizzy:
     
  2. Robhollar

    Robhollar Senior Member
    Messages: 766

    Ive got sheets of poly what is the measurements that you need? I dont know how Id get it to you but let me know anyways....Rob
     
  3. danno

    danno Senior Member
    Messages: 401

    Try angelossupply,com. Thats where I bought mine. 40.00 shipped.
     
  4. Robhollar

    Robhollar Senior Member
    Messages: 766

    What i have isnt the stuff that is paper thin like danno is talking about. Mine is 3/8 thick.....Rob
     
  5. danno

    danno Senior Member
    Messages: 401

    BTW, the skin is suppose to fit under the cutting edge of say a Meyer. Tucking it under a Fisher, you trip the edge, and there goes the skin.
     
  6. 1bohica

    1bohica Junior Member
    from MA
    Messages: 25

    7.5 plow skin

    just to clarify...I am looking for the steel mold board:dizzy:
     
  7. R&R Repair

    R&R Repair Junior Member
    Messages: 28

    Plow skin

    Try turner steel in Bridgewater they may roll a piece of 12 gauge for you ... If not give me a call I have some 12 gauge in stock and its not that tight of a bend to make and weld as you go.
    Russ 508-326-4228