1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Location of Hazard Flasher on '84 F250

Discussion in 'Ford Trucks' started by Woodman, Jan 27, 2000.

  1. Woodman

    Woodman PlowSite.com Veteran
    Messages: 14

    I've got a '84 Ford F250 and I went to turn on my 4 way flashers the other night and the lights came on but didn't flash.<p>Looks like there are 2 flasher units- 1 for the turn signals and another for the hazards based on my Haynes manual The turn signal unit is right on the fuse block - I already tried replacing it without success (the turn signals worked fine before & after). <p>I've looked a bit under the dash but can't see anything that even resembles the flasher unit. Any suggestions on where to look?<p>
     
  2. Eric ELM

    Eric ELM Husband, Father, Friend, Mentor, Angel
    from Chicago
    Messages: 239

    I sold my 85 F 250 a little over 2 years ago, but I was thinking it was under the dash too. Keep looking until someone can give you an answer. Sorry my memory is so short. <p>----------<br>&lt;a href=&quot;http://pages.prodigy.net/eric.erickson/index.html&quot;&gt;Eric@ELM&lt;/a&gt;<br>
     
  3. thelawnguy

    thelawnguy PlowSite.com Addict
    Messages: 1,011

    I sold my 85 F-350 eight years ago, but if I remember correctly it was in the harness near the steering column. Look up under the dash near the brake pedal and you will see it, sometimes its wrapped with a piece of tape to keep it from dropping down.<p>Bill
     
  4. Woodman

    Woodman PlowSite.com Veteran
    Messages: 14

    Thanks for the suggestions - Finally found it on the back side of the fuse block on Saturday when it was a little warmer.<p>Fired the truck up today to clear 9&quot; of snow and the fuel pump crapped out. Some days....<p>Thanks again for the help<p>Woodman