1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Link Arms

Discussion in 'Western Plows Discussion' started by littlehammer, Dec 17, 2009.

  1. littlehammer

    littlehammer Junior Member
    Messages: 13

    Wondering if anyone knows the length of the link arms a 6.6' unimount uses.Any help would be appreciated.
     
  2. Western1

    Western1 Senior Member
    from MI.
    Messages: 674

    I believe it depends on the mount not the plow. What mount is it or what truck is it going on?
     
  3. littlehammer

    littlehammer Junior Member
    Messages: 13

    well it's going on a 2002 dodge dakota, if that makes a differerence.
     
  4. Western1

    Western1 Senior Member
    from MI.
    Messages: 674

    It should use the standard length ones which are 4.56" from center of hole to center of hole and about 6.50" overall length.
     
  5. littlehammer

    littlehammer Junior Member
    Messages: 13

    Thanks for your help!
     
  6. Western1

    Western1 Senior Member
    from MI.
    Messages: 674

    No problem,good luck.