1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

lights on lift frame stuck

Discussion in 'Truck & Equipment Repair' started by jdb7654321, Feb 2, 2014.

  1. jdb7654321

    jdb7654321 Junior Member
    from york pa
    Messages: 11

    I have an extra lift frame with nice nite saber lights on it but I cant get the nut off the bolt it just spins the whole bolt can I cut the nut off and replace that bolt coming out of the light or is there another way thanks
  2. vinnys

    vinnys Senior Member
    Messages: 112

    Take the light apart and see whats going on inside. Most of these lights use a carrage bolt.
  3. xgiovannix12

    xgiovannix12 PlowSite.com Addict
    Messages: 1,417

    what I did with mine was cut the stud and weld another bolt to the stud.

    I cut the head off the new bolt too. It works like a charm