1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Light Problems

Discussion in 'Fisher Engineering Discussion' started by GMCHD plower, Jan 20, 2014.

  1. GMCHD plower

    GMCHD plower PlowSite.com Addict
    Messages: 1,819

    Hey guys, having an issue with my low beams. I got a new headlight put in my truck the other day by a body shop, and now my left low beam on my plow won't work, I've isolated it to the truck side, hooked my plow to another truck and it was fine. Any suggestions?
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,563

    Make sure they didn't flip the truck side connector of plow light harness.
     
  3. GMCHD plower

    GMCHD plower PlowSite.com Addict
    Messages: 1,819

    Little knowledge of wiring here, what do you mean "flip" it? My high beams work on both sides, its just my left side low beam... Thanks!
     
  4. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,563

    The connector on plow light harness can be turned 180* and plugged back in.

    plow 002.jpg
     
  5. GMCHD plower

    GMCHD plower PlowSite.com Addict
    Messages: 1,819

    Where it plugs into the isolation module?
     
  6. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,563

    No, this is where the truck plugs into the plow light harness. Down by headlights.
     
  7. GMCHD plower

    GMCHD plower PlowSite.com Addict
    Messages: 1,819

    Ok thanks, I'll try to find it in the morning.