1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Light harness Hardwired to Vehicle Parking Light Circuit?

Discussion in 'Ram Trucks' started by Pcarrier0927, Dec 10, 2012.

  1. Pcarrier0927

    Pcarrier0927 Junior Member
    Messages: 14

    Hello Everyone, Trying to get the plow ready before the snow (If we ever get any!)
    Here is where i'm at, I got all of the wiring all set beside the brown and grey wire as well as the purple wire (Brown and Grey located on drivers side, Purple on passenger)
    I was told by my local Fisher Dealer that I have to hard wire these wires into Blinker, vehicle turn circuit etc.
    Is this true and if it is and tips on how to do it right? Also what colors go where?
    Any info would be greatly appreciated!
    97 Ram 2500 5.9 Laramie Minute Mount 1 system 2 plug.
    Thanks again!
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,971

    Yes you do. The purple on pass side is the turn signal. The bwn is parking lights and the grey is left turn. The best option is to use heatschrink connectors for a good seal