1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

LED flasher info

Discussion in 'Strobe Lighting' started by J & B Lawncare, Nov 8, 2007.

  1. J & B Lawncare

    J & B Lawncare Member
    Messages: 88

    LED need a special flasher because of the low power draw. If your adding led to an exsiting circut doe you need the new flasher.

    Thanks
     
  2. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    What type of LES's? Stop&Turn or Amber LEDs?
     
  3. 06HD BOSS

    06HD BOSS 2000 Club Member
    Messages: 2,611

    a lot of the newer ones are self contained with a built in flasher. but depending on the brand, they would say if they need a seperate flasher or not
     
  4. midwestsnowguy

    midwestsnowguy Member
    from midwest
    Messages: 36

    LED Flasher

    If turn signal flash faster than an incadesent, you will need a load resistor placed on each side. I have them... 231 737-1050.
     
  5. murphyslaw

    murphyslaw Senior Member
    Messages: 443

    the problem with puting in a load resister is it negates that lower power draw of the led. they make solid state led flashers that will let them flash as normal and still have the lower power draw
     
  6. BSDeality

    BSDeality Senior Member
    Messages: 736

    bingo. Its also much easier to just change the flasher than add a resistor to each bulb.