1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

last weekends project

Discussion in 'Equipment, Tools & Vehicle Pictures' started by sluggermn, Nov 13, 2009.

  1. sluggermn

    sluggermn Member
    Messages: 85

    here is what I did last weekend
    #1 I rebuilt the pump, stripped it and painted it
    #2 I installed a new roof mount antenna for the c.b. radio
    #3 I installed the new light bar
    here are some pics, keep in mind last weekend and all this week have been deer season so the truck got a little dirty and I have not had time to clean her up. (that is this weekends project.)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    slugger
     
  2. REAPER

    REAPER 2000 Club Member
    from 60050
    Messages: 2,228

    Not sure that Galaxy 250 is legal is it?

    It also looks like your plow lights are even with your truck headlights. Is that a mod?
     
  3. sluggermn

    sluggermn Member
    Messages: 85

    the galaxy came with the cb and with a ham ticket it is legal.
    the plow lights are about a inch to 2 inches higher that the truck lights which is how I got the truck, they should be up above the hood in my opinion but I have not had time to cut the brackets and extend them up where they should be. they work ok where they are at so it is a low priority project.

    slugger
     
  4. cpsnowremoval

    cpsnowremoval Senior Member
    Messages: 223

    looks good i got the same mount. how do you got you pushing bracket for the lower half of the mount?
     
  5. sluggermn

    sluggermn Member
    Messages: 85

    I am sorry I am not clear on what you are asking me?
     
  6. TLB

    TLB Senior Member
    Messages: 274

    No, and neither is my HR 2510 & Boomer Deluxe 400;)
     
  7. cpsnowremoval

    cpsnowremoval Senior Member
    Messages: 223

    on the bottom of your plow frame where the tabs hook in. i was wondering what kind of brakets u have that are support for the pushing part.
     
  8. sluggermn

    sluggermn Member
    Messages: 85

    here are some pics of the part in question
    [​IMG]

    [​IMG]

    [​IMG]

    is that what your are looking for?
    on my truck the frame (truck) side bracket is welded to the frame so It does not come off for the summer.
    slugger
     
  9. cpsnowremoval

    cpsnowremoval Senior Member
    Messages: 223

    thanks 4 the pic
    i have to build some supports coming off the frame for the lower mount on mine
     
  10. GatorDL55

    GatorDL55 Senior Member
    Messages: 122

    What kind of SWR are you getting with that rig on that antenna?
     
  11. sluggermn

    sluggermn Member
    Messages: 85

    barely 1
    when I key up and start yapping it needle on my swr meter just barely twitches.