1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Keeping the snow off the moldboard

Discussion in 'Commercial Snow Removal' started by Roger Dodger, Nov 26, 2002.

  1. Roger Dodger

    Roger Dodger Senior Member
    from nw Pa.
    Messages: 240

    Other than applying the typical car paste wax, is anyone using something that works better and lasts longer? Just thought it might benefit some of us to share this info.
     
  2. edrenckh

    edrenckh Member
    Messages: 61

    I use a Boss Poly Vee.
     
  3. Emerald Hydro

    Emerald Hydro Junior Member
    Messages: 3

    I keep a can of non stick cooking spray like Pam or Crisco in my truck. Spray it on your blade a couple times a night.
     
  4. snowplowjay

    snowplowjay Banned
    Messages: 890

    Slippery Tire Dressing one of those like black magic i think the name is works pretty good for keeping it lubed for good plowing.


    Jay
     
  5. SIPLOWGUY

    SIPLOWGUY Senior Member
    Messages: 678

    Thanks for the tips guys!
     
  6. Roger Dodger

    Roger Dodger Senior Member
    from nw Pa.
    Messages: 240

    Emerald Hydro, I used that "Pam" stuff on the augers in the tractor mounted blower but, after a time it would leave a sticky residue that became dirty. Required degreasing and pressure washing to remove. Yes it does work, until too much accumulates, so it seemed.