1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

just got a whelen 9000 lightbar, have a question

Discussion in 'Strobe Lighting' started by taz_6_1999, May 30, 2011.

  1. taz_6_1999

    taz_6_1999 Junior Member
    Messages: 4

    i bought a whelen 9000 model number 94305w00. when i got it it had no paper work on how to wire it up. is there anyone on here that might be able to help me?
     
  2. Rc2505

    Rc2505 PlowSite.com Addict
    Messages: 1,245

    If you call Whelen customer service and give them the model number, and the serial number, and your e-mail address. They will send you the exact wiring diagram for your bar. I have done this twice now, and haven't had any problems.
     
  3. cat320

    cat320 2000 Club Member
    Messages: 2,223

    or just go to there web site i think they have all schmatics on there .
     
  4. taz_6_1999

    taz_6_1999 Junior Member
    Messages: 4

    this bar has two sets of wires. i got what i need for the big one but the little one only has four wires in it and they are red, yellow, white and black.
     
  5. massfirefighter

    massfirefighter Senior Member
    from mass.
    Messages: 128

    Only 4 wires in the control cable is either not enough
    or the bar you have needs a special switch like a PCCS9.
     
  6. massfirefighter

    massfirefighter Senior Member
    from mass.
    Messages: 128

  7. taz_6_1999

    taz_6_1999 Junior Member
    Messages: 4

    i got what i needed off whelens web site and the small cable that has the four wires in it went to the stop turn tail lights.