1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

JCB 426 HT with Bizzard 8611ss

Discussion in 'Commercial Snow Removal' started by palmerl, Nov 14, 2009.

  1. Looking for info we have JCB 426B HT and have just purchased a Bizzard 8611 ss where does the control handle mount in the cab is there a special wiring harness?
     
  2. Jerre Heyer

    Jerre Heyer Senior Member
    Messages: 948

    Depending on what it came off of it will have a 14 pin or a 7 or 9 pin on the end of the control harness coming from the plow or will have a molded plug connector. Picts of the plug will help determine what you have. On most SS units there either plugged into the skidder wiring or have a separate control harness. Controller mounting in the cab is at your decision. It can be attached to the standard loader control or left loose or have a custom mount made.

    J