1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Is This Enough??

Discussion in 'Bidding & Estimating' started by Double C, Sep 8, 2008.

  1. Double C

    Double C Member
    from Montana
    Messages: 41

  2. cretebaby

    cretebaby PlowSite Veteran
    Messages: 4,162

    1.5 hours with a strate 8

    your price seams high IMO
  3. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,030

    I won't comment on price but I think you'll plow it in half the time you said.
  4. 06HD BOSS

    06HD BOSS 2000 Club Member
    Messages: 2,611

    if im looking at the right lot, that should take you no more than 45min - 1hour. it looks very straight forward and you have the whole south side of the lot to stack snow. i think your price is decent. thats about what its worth here
  5. LoneCowboy

    LoneCowboy PlowSite.com Addict
    Messages: 1,760

    An hour at most.

    I think you're about double what it should be.
    I could bid that at $150/$175 and make good money at it (just the lot)

    I think you're way high, esp for Montana where prices are low.
  6. QuadPlower

    QuadPlower PlowSite.com Addict
    Messages: 1,056

    I say an hour with room to push the snow. What is your hourly rate? Multiply that time 1 and you have your bid amount.

    Good Luck
  7. iceyman

    iceyman 2000 Club Member
    Messages: 2,521

    $200 sounds like a good price ....just for plowing
  8. Burkartsplow

    Burkartsplow PlowSite Veteran
    Messages: 3,248

    one hour to plow that lot, I would say go for$125 to $150 for plowing only. good luck
  9. Double C

    Double C Member
    from Montana
    Messages: 41

    ok readjust time and price to 1.5 hours and $200 submitting bid tomorrow will let you know if it works out. Thanks for all your help the people on this site are great!!!
  10. ildiesel86

    ildiesel86 Junior Member
    Messages: 6

    In my area i could get a lot that size for 2 to 5 inches for 300 with a 7'6" s. blade. But it all depends on the area, and then add salt, sidewalks, and fuel sur-charge.
  11. PerfiCut Inc.

    PerfiCut Inc. Senior Member
    from Eastern
    Messages: 161

    1 hour, no problem.