1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Intermittent angle

Discussion in 'Fisher Engineering Discussion' started by hilojack, Dec 22, 2008.

  1. hilojack

    hilojack Junior Member
    from RI
    Messages: 6

    My minute mount SEHP will not angle consistently. It raises and lowers with no problems but it will freeze up sometimes when I try to angle. When it gets stuck if I wiggle the joystick quickly back and forth from left to right it will free itself up and work for a short time. I am going to clean out all the old fluid and change the filter. Should I change the “cross over valve” at the same time? Is that valve most likely the cause?
    Thanks Guys, Jack
     
  2. hilojack

    hilojack Junior Member
    from RI
    Messages: 6

    I cleaned all of the contacts on the connectors, applied some dielectric grease and it seems to have fixed the problem. Sometimes it is easier than we think.