1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Intensifiers on a MM1 9 pin harness

Discussion in 'Fisher Engineering Discussion' started by ram_tough2001, Feb 27, 2010.

  1. ram_tough2001

    ram_tough2001 Senior Member
    Messages: 174

    hi i was wondering if it was possible to install intensifiers on my MM1 plow. it has the 2 plug setup. the 9 pin harness and the battery cable. thats it. so is it possible or not? please let me know. thanks.
     
  2. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,593

    You can do it and its worth every penny. Just involves splicing into your existing light harness, but the instructions and everything you need are in the kit. You'll need to extend your mounting brackets also to clear the lift arm; I used some angle iron.
     
  3. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

  4. ram_tough2001

    ram_tough2001 Senior Member
    Messages: 174

    thanks for all the info. now its time to get som for next season.