1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Insta act 1 Motor runs but no ram action

Discussion in 'Fisher Engineering Discussion' started by d2_, Feb 13, 2014.

  1. d2_

    d2_ Junior Member
    Messages: 2

    Hello newbe here. I've got 7'6 rd with insta act 1 . the motor went and had it rebuilt. Reinstalled it and all I get is the motor running no ram action when any of the controller buttons hit. took the pump out and apart the gears are not torn up. checked the resevoir tube and filter and seemed good I've got correct solenoid control from the fish stick as the Mechanics guide shows using screw driver. the 3 solenoids all Ohm out close to 7. When the motor runs it does not seem that any fluid is being drawn in. Left and right ram seem stuck and do not move. Its not frozen either. At a loss any help would be appreciated. d2