1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

I'm not sure

Discussion in 'Meyer / Diamond Products Discussion' started by Surfdunn, Dec 14, 2007.

  1. Surfdunn

    Surfdunn Member
    Messages: 43

    I'm really stumped on my dads blad. he has the quick mount w/ a E60. Last year everything ran fine. went and plugged it in the other day and the blade wont go left or right, up or down. Checked the fluid, drained it and re filled it and still nothing. Its def. getting power because you can hear the pump trying but its not going anywhere. I think that its just a valve that stuck and need to be cleaned out but I'm not sure. anyone have any suggestions.
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Pretty uncommon for it to lose all functions, but for it to not angle left, right, or raise,

    it either has to be out of fluid....
    or the fluid frozen
    the gear pump is damaged/relief valve defective (no pressure)...
    the rear filter is completely plugged....
    or the motor is spinning in the wrong direction...

    It could also have a defective B valve, but it would also have to have a bad quick coupler at the same time for it to not raise or angle in either direction.