1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

I need salt

Discussion in 'Ice Management' started by DJ Contracting, Mar 2, 2008.

  1. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392

    I need salt in here in Bay City Michigan bulk or bagged you can either pm,call,or let me know on this thread thanks Joe

    989 233-3526
     
  2. flykelley

    flykelley 2000 Club Member
    Messages: 2,124

    Hi Joe
    I know this might be a bit of a drive but Burke Lumber on Dixie Hwy in Waterford MI still has pallets of 50# bags. I still think he is under $200 a pallet. It is right off I75 at the Pine Knob Exit. Phone number is 248 673-1211

    Good Luck Mike
     
  3. PremierLand

    PremierLand PlowSite.com Addict
    from detroit
    Messages: 1,572

    have you tried angelos? I picked up a pallet the other day from them.
     
  4. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392


    Where is Angelos? There is one more fertilizer place here that i will call today
     
  5. flykelley

    flykelley 2000 Club Member
    Messages: 2,124

    Farmington Hills, alot farther for you than Waterford.

    Regards Mike
     
  6. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392


    OK i just got off the phone with this fertilizer co. and they have 7 #50 bags left. :cry:
     
  7. RYDER

    RYDER Senior Member
    Messages: 281

    I plow for a guy that is a wholesale salesman for bagged salt in the Grand Rapids, MI area. If you want hes number you can PM me and I will send it to you maybe he can help you.payup
     
  8. Runner

    Runner Senior Member
    Messages: 957

    Chemco here in Flint has pallets of 80 and 50. The cost is around 150 a pallet for 80's.
     
  9. jkowal

    jkowal Junior Member
    Messages: 5

    I can get you salt somewhere in the $100 range...
     
  10. michigancutter

    michigancutter Senior Member
    Messages: 539

    im looking for 1 ton of bulk salt or a skid of salt? Can any one help? north macomb area thanks mike
     
  11. Metro Lawn

    Metro Lawn PlowSite.com Addict
    Messages: 1,302

    there are several people on Craigslist with salt for sale.
     
  12. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392


    Can you get me the phone number thanks Joe.
     
  13. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392

    Where are you located and is there a min. i would have to buy.



    Thanks i'll take a look.
     
  14. Superior L & L

    Superior L & L PlowSite Veteran
    from MI
    Messages: 3,039

    I bet there is probably going to the highest bidder!
     
  15. mills64463

    mills64463 Junior Member
    Messages: 3

    Our supplier is up to $180 a ton. Anyone know where we can get it any cheaper?? We were only charging $115 with labor to put it down.

    How is everyone charging this to the customer?
     
  16. Superior L & L

    Superior L & L PlowSite Veteran
    from MI
    Messages: 3,039

    We've been mixing "hot sand" 2 parts salt 1 part sand to bring our cost per ton down. By mixing it the parting lots dont look as bad as the one were people are using straight sand.
    Also let your customer decide no salt, higher price or sand and dirty parking lot
     
  17. Superior L & L

    Superior L & L PlowSite Veteran
    from MI
    Messages: 3,039

    Whould you like him to deliver it to you also LOL
     
  18. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392


    No a phone number would be sufficient. thanks Joe
     
  19. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392

    Well i finally found some salt :redbounce i will be picking it tomorrow.
     
  20. KINNCO

    KINNCO Senior Member
    Messages: 256

    I'm down to 2 ton:realmad:and really don't want to buy another skid