1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

I need help with a 1994 dodge ram 2500 and a 1997 dodge ram 2500

Discussion in 'Truck & Equipment Repair' started by jmcgmack90, Sep 26, 2008.

  1. jmcgmack90

    jmcgmack90 Junior Member
    Messages: 3

    I need to know if they make the undercarriage brackets for meyers for these trucks I have the plows and the pumps I just need the brackets to go on the truck I need part numbers and if anyone has them im in new york on long island thanks everyone in advance.Also I have 2 fisher complete set ups that are older they are hydro 8ft do they make brackets for them to mount it on the dodge trucks also need part numbers thanks :redbounce
     
    Last edited: Sep 26, 2008
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    For the EZ classic style mount you need Meyer p/n 17104....and both trucks use the same mount btw.

    You'll need the lift frames as well, p/n 11255
     
  3. jmcgmack90

    jmcgmack90 Junior Member
    Messages: 3

    ok the lift frame comes up but not the brackets thanks
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Where'd you look them up? The p/n's still good.
     
  5. jmcgmack90

    jmcgmack90 Junior Member
    Messages: 3

    ok yes u were right it comes up they are just a little hard to find thanks:waving: