1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

I guess its my turn... Plow Rehab!

Discussion in 'Fisher Engineering Discussion' started by Clapper&Company, Oct 23, 2009.

  1. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Well Its raining so we pulled the Fisher in the shop and started to rehab it!!!

    Here are some starter photos:

    Fisher Plow 10-23-09.jpg

    10-23 Project.jpg

    Fhisher project 10-23.jpg

    Project.jpg
     
  2. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    and some more photos

    10-23-09 Fisher plow.jpg
     
  3. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Got it all apart, and slowly working on it.... I'll have more photos later tonight for you
     
  4. YardMedic

    YardMedic PlowSite.com Addict
    Messages: 1,266

    That is definitely a plow in need of attention! Should look great
     
  5. B.Bells

    B.Bells Senior Member
    Messages: 125

    Should turn out nice! Knowing Clapper he's hand buffing it already! :laughing:
     
  6. G.M.Landscaping

    G.M.Landscaping Senior Member
    Messages: 362

    Don't even waste your time with that paint remover. Just go get everything sand blasted.

    Looking foward to the progress.
     
  7. toby4492

    toby4492 2000 Club Member
    Messages: 2,513

    There Ron all fixed now :laughing::popcorn:
     
  8. JohnnyRoyale

    JohnnyRoyale 2000 Club Member
    Messages: 2,935

    Is he plowing that place for credits too? :drinkup:
     
  9. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Yea, it was time she got some TLC, That plow is a 99 and has never had any lovin done to it, so IMO it's not to bad for being 10 yrs old

     
  10. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    OK, so its all broke down and the plow is clean, and the back side has a coat of primer on it.

    I'll get more photos posted soon,

    Hope to get the whole plow primer tomorrow.


    Got a call back from fisher this morning, and there going to be sending me out the replacement Decals :D
     
  11. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Got the Plow all primer today....

    Here is the Front and Back shots

    Front of plow 1.jpg

    Front of plow primer.jpg

    Plow- Back side primer.jpg

    Plow Primer - back #2.jpg
     
  12. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Took my time to clean up and primer the Motor....


    .... Also Got the light towler done

    Pump Primer - Fisher.jpg

    Light towler - Fisher Primer.jpg
     
  13. iceyman

    iceyman 2000 Club Member
    Messages: 2,545

    that things lookn good,.,
     
  14. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    The Black spots you see on that pump above are areas that we got taped off...

    .... Also sorry them photos didnt turn out to good....


    Im happy we tore this unit down, cause I found this !:realmad:

    Fisher - Broke A Frame.jpg
     
  15. B.Bells

    B.Bells Senior Member
    Messages: 125

    Looking good ron! Hope she does you proud!
     
  16. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Thanks, slowly doing it.... Could rush it and get it done, but got lots of time and its been crapy out side so no need to get in a hurry
     
  17. f250man

    f250man PlowSite Veteran
    Messages: 3,124

    You didnt prime all that stuff by hand did you?

    Your not leaving the light tower red are you?

    Its looking good there buddy. :waving:
     
  18. MRBachand

    MRBachand Senior Member
    Messages: 198

    Lookin nice! I wish I had a sandblaster/compressor setup large enough to do this to mine... Just can't see paying someone to do it...

    I like the red. Add some color to that ol' bone!
     
  19. MRBachand

    MRBachand Senior Member
    Messages: 198

    Hard to make out what that is by the picture.. please do tell!
     
  20. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    I dont know how you reply to you.... other then you been bustin my balls all day... so im just going to leave