1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

I.D. this plow for me

Discussion in 'Commercial Snow Removal' started by xtreem3d, Nov 8, 2010.

  1. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    Last edited: Nov 8, 2010
  2. Pristine PM ltd

    Pristine PM ltd PlowSite Veteran
    Messages: 3,798

    kinda looks like it could be an arctic, but I bet it is a western.
     
  3. NW Snow Removal

    NW Snow Removal Senior Member
    Messages: 533

    looks like an old municipal plow.
     
  4. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    would a western be orange? and would a municipal plow be poly?
     
  5. Pristine PM ltd

    Pristine PM ltd PlowSite Veteran
    Messages: 3,798

    sun does weird things
     
  6. fireside

    fireside Senior Member
    Messages: 661

    looks like a flink highway plow
     
  7. Flipper

    Flipper PlowSite.com Addict
    from CT
    Messages: 1,180

    I agree that it looks like a Frink Poly. However a lot of those muni plows look very
    similiar. It could also be a Viking-Cives.

    Most of the municipal plow manufacturers make Poly models. Many of them have been making Poly plows since the mid-90s
     
  8. Metro Lawn

    Metro Lawn PlowSite.com Addict
    Messages: 1,302

    I have seen these on many city and highway dept. trucks. Not sure of the maker, but I know they can roll almost into a circle to channel snow out to the side more and not into the air.
     
  9. LON

    LON Senior Member
    Messages: 749

    Attached Files:

  10. motoxguy

    motoxguy Senior Member
    from WI
    Messages: 295

    i think it may be a Wausau although most i've seen are blue but i have seen some that are orange.
     
  11. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    thanks alot for that post LON....thinking i can't go wrong for about $300.00
     
  12. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    LON,
    would i have to use their cylinder for any reason. i have central hyd on a truck i just bought and am "restoring"

    DSCN0269.JPG
     
  13. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    PS i just noticed the rams are NOT on top of the push frame?
     
  14. LON

    LON Senior Member
    Messages: 749

    You mean the angling rams?
    Your lift looks like it can be used.
    Need any parts let me know.
    FYI, new it was 4402 list.

    Lon
     
  15. xtreem3d

    xtreem3d PlowSite.com Addict
    Messages: 1,548

    LON...yes the angling rams...only bring it up because the Henderson ad says they are on top. It doesn't matter i'tl work. going to look at it fri
    thanks for the help so far. 4400 seems cheap for a plow like that !!!!
    steve
     
  16. LON

    LON Senior Member
    Messages: 749

    probably an early model before they found out they needed to be on top.