1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Hydraulic Motor

Discussion in 'Ice Management' started by cet, Oct 25, 2009.

  1. cet

    cet PlowSite Fanatic
    Messages: 7,202

  2. LON

    LON Senior Member
    Messages: 749

    You would be looking for a Char-Lyn #101-1323-009 2-bolt flange motor. Something I keep.
     
  3. cet

    cet PlowSite Fanatic
    Messages: 7,202

    Thanks for the help. I replaced the seal in mine and it seems to be fine. Mine was a 4 bolt.
     
  4. LON

    LON Senior Member
    Messages: 749

    Seal kit will work for a little while. What you want to look for when you remove the end cap is to see if there is a ring wore around the shaft were the seal sits. It is quite common to see it worn there and the new seal will only last a short while before it starts to leak again.
     
  5. cet

    cet PlowSite Fanatic
    Messages: 7,202

    I will watch for that, thanks.