1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Hydraulic Fluid Level

Discussion in 'Truck & Equipment Repair' started by RepoMan207, Oct 16, 2008.

  1. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    How much hydraulic fluid does a Fisher SEHP Pump hold. It's the 10" Housing. I looked all over fisher's site. Alot of info, just not what I need. Are we looking at a quart or so, or the big gallon?
     
  2. Mick

    Mick PlowSite.com Veteran
    from Maine
    Messages: 5,546

    If I remember, it took one quart to completely fill the reservoir. Have you drained the rams, too?
     
  3. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    yup...I actually just found it 2.86 fluid oz totaly drained. Thanks for the reply though
     
  4. Mick

    Mick PlowSite.com Veteran
    from Maine
    Messages: 5,546

    2.86 fluid oz totaly drained??? Boy, was I off. I had that plow several years ago and had to drain it once. Now you know why I don't service my own stuff. It still seems like I wound up using a whole quart, though.
     
  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    I believe he meant qts Mick..

    2.86 oz wont even get the filter wet. :D
     
  6. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    thats what I get for pulling an all nighter. Yes. Qts was correct.