1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

HTS will not scrape to ground

Discussion in 'Western Plows Discussion' started by bebop86, Mar 1, 2015.

  1. bebop86

    bebop86 Junior Member
    from nj
    Messages: 22

    Guys - when I plow with my new HTS- it does not scrape all the way to the pavement- is it because there is not enough weight??- thanks
     
  2. ggb6259

    ggb6259 Senior Member
    from SW MI
    Messages: 214

    yes.............
     
  3. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    Could be not setup right I seen heavy plows don't scrape well until they are adjusted right

    If your A frame is to high or to low wont scrape well.
     
  4. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,503

    Get with snofarmer.
     
  5. dstifel

    dstifel Senior Member
    from Iowa
    Messages: 188

    Mine did not until I put a level kit on my truck now it does a great job
     
  6. jmac5058

    jmac5058 Senior Member
    Messages: 428

    Did you try holding the down button really hard for as long as you can till your thumb gets sore ? Thats what I find myself doing when not scraping good , its never made a bit of difference but I still try.
     
  7. bebop86

    bebop86 Junior Member
    from nj
    Messages: 22

    I think the problem could be that when the plow is on even with a couple of hundred pounds in the back the front end of my jeep sags down a couple of inches- I assume this is the problem-
     
  8. nealybird

    nealybird Senior Member
    Messages: 714

    that's good stuff there dude! :)
     
  9. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,946

    You sure that's not In the manual? Towards the back?
     
  10. nealybird

    nealybird Senior Member
    Messages: 714

    should be! lolz