1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

How to wire Truck-Lites to replace Sabers--ANYONE DONE THIS?

Discussion in 'Meyer / Diamond Products Discussion' started by snowdays, Nov 19, 2011.

  1. snowdays

    snowdays Senior Member
    from Ohio
    Messages: 119

    I need to replace my Night Sabers on my truck with some other lights. I have a set of Truck-Lites and would like to put the Saber plug on the Truck-Lites and plug in. I tried to wire but the high beam indicator stays on in the truck if they are on or off. Anyone done this
     
  2. Nasty-Z

    Nasty-Z Senior Member
    Messages: 370

    I do not know what lights you are replacing the sabres with , but the color code for the wires leading to the night sabre lights is as follows:

    High Beam Lights - Red Wire
    Ground (common) for headlamps- Blue Wire
    Low Beams Lights - White Wire
    Park Lights - Yellow Wire
    Ground (common) for park/turn- Black Wire
    Turn Signals- Green Wire

    HTH

    TOM
     
  3. snowdays

    snowdays Senior Member
    from Ohio
    Messages: 119

    Thanks Tom. I figured it all out by applying 12V to each wire on both sets of lights.