1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

How to test a meyers plow pump?

Discussion in 'Commercial Snow Removal' started by onebadf-350, Jan 28, 2005.

  1. onebadf-350

    onebadf-350 Junior Member
    from ohio
    Messages: 1

    Ok I testing a meyers plow pump I have the ram up how do I get it down with a set of jumper cables?
  2. gt_racer50

    gt_racer50 Senior Member
    from Ohio
    Messages: 484

    ???????????????????????????? How did you get it up?
  3. ACA Landscaping

    ACA Landscaping Member
    Messages: 53


    you have to put power to the float selinoid depending on which model you on a e 47 the float is the small one in the back /black wire/ just put power to that and should be able to push back down
  4. Robhollar

    Robhollar Senior Member
    Messages: 766

    put 12 volts on the black wire to drop the plow....Rob