1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

How to level blade??

Discussion in 'Boss Plows Discussion' started by SteveR, Mar 3, 2008.

  1. SteveR

    SteveR Senior Member
    Messages: 252

    I just had to replace my front springs in my F250. I went with the HD springs and now when I have my plow angled back the edge doesnt touch all the way across the plow seems to lean fwd from the truck and I had to lift it to get it mounted. My guess is that I can just take out 4 bolts and level things up. Sometimes things that look this simple are not so I thought Id ask the question.
    Thanks
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Yep, if you have adjustment holes left below where it's currently at you can simply move the push beam down to the correct height. Nothing too difficult about it.
     
  3. RBRONKEMA GHTFD

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Just make sure to use Red lock tight on all thr bolts you take off.