1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

How to install Timbrens

Discussion in 'Truck & Equipment Repair' started by Alaskaforby4, Dec 16, 2011.

Tags:
  1. Alaskaforby4

    Alaskaforby4 Member
    from Alaska
    Messages: 74

    Pic 2) The lowest part of the plow mount sits at about 6" from the ground. The T-bars are cranked pretty much to the max.
    Pic 3) This is the Factory bump stop setup
    Pic 4) I had to file out the hole just a tiny bit to get the bolt to slip through
    Pic 5) With the Timbren installed
    Pic 6) I gained maybe a 1/2" with the plow up, but it is very solid now...going over bumps and what not it seems alot more stable. I like them so far

    IMG_1030.jpg

    IMG_1031.jpg

    IMG_1033.jpg

    IMG_1034.jpg

    IMG_1035.jpg
     
  2. Alaskaforby4

    Alaskaforby4 Member
    from Alaska
    Messages: 74

    This is after they are installed with plow up

    IMG_1037.jpg
     
  3. Alaskaforby4

    Alaskaforby4 Member
    from Alaska
    Messages: 74

    Also on the other side I had to change direction of the shock mount bolt so the thread end was facing the front of the truck, for clearance.