1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

How to ID Fisher MM Pushplates

Discussion in 'Fisher Engineering Discussion' started by pawsoff, Nov 9, 2012.

  1. pawsoff

    pawsoff Junior Member
    Messages: 11

    hey guys, when I bought my Fisher plow set up, I got as set of push plates with it, which were not for my truck (was for a chev he thought). I went and bought a used set for my Dodge Ram.
    I am looking to sell the this extra set, whereas this guy did not use the peculiar mounts and was not sure which vehicle or year they were for, How do I Identify the set I have?
    There does not seem to be a serial # or model # that I can find on them, any suggestions on how to figure out which peculiar vehicle mount these are?
     
  2. LON

    LON Senior Member
    Messages: 749

    Post pictures and let us figure them out for you. Only way.
     
  3. pawsoff

    pawsoff Junior Member
    Messages: 11

    OK guys, here are some pics of the mounts in question, I couldn't find any numbers on them at all, but they look right and are powder coated. Any help ID'ing them would be great. I believe it is for a Fisher MM1 plow. The guy i got em with the plow said he thought they were for a chev (88-98) but was not sure as he hadn't used em.
    [​IMG]
    [​IMG][​IMG]
     
    Last edited: Nov 20, 2012
  4. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    they look like a 95 or so chevy but im not a positive
     
  5. mksent02

    mksent02 Member
    Messages: 37

    1988-2000 2500 & 3500 chevy or Gmc 8600 gvw (8 lug) also fits 1992- 2000 suburban. part# 7125 copied that from MY ad on craigslist! copy and paste away.
     
  6. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    They most definitly are not 7125 !!!!



    Those plates are 7138 for 88 to 2000 the fit 1500 series and 6 lug 2500,
     
  7. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    They are 7138 It doesnt matter if its a mm1 or 2 there the same thing,
     
  8. mksent02

    mksent02 Member
    Messages: 37

    sorry, looked at the bigger pics, I see the 2 holes now.
     
  9. buddymanzpop

    buddymanzpop Senior Member
    Messages: 601

    The little step down piece welded on to the bottom rear of the plate that sits up against the bottom of the frame rail is another key to identifying the 7138 from the 7125
     
  10. joeyg999

    joeyg999 Member
    from Kansas
    Messages: 79

    I think I had the same on a 94 chevy 2500 6lug.
     
  11. pawsoff

    pawsoff Junior Member
    Messages: 11

    Thanks Guys that is a huge help, bigs thumbs up to Brad.
     
  12. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    Yes thats what I look at when I need to tell the difference.
     
  13. NHresident

    NHresident Senior Member
    Messages: 285

    just so u dont piss of a buyer after the fact you should also have to 2 small metal rectangular backing plates that have 2 1/2 threaded holes their about $25.00 each and pretty key to help avoid frame cracking dwn the road which a knowledgable buyer would be looking for if u go to fisherplows.com and put in 7138 in the search engine u'll be able to see what i mean
     
  14. bob00

    bob00 Senior Member
    Messages: 143

    7138 are a dime a dozen
    [​IMG]
    obs gm 1/2 tonne truck ( 6 lug nut )




    7125 not so cheep
    [​IMG]
    obs gm 3/4 and one tonne truck (8 lug nut)
    see the little pices that go up at the end and the tail is a bit longer
     
  15. stenny

    stenny Senior Member
    Messages: 107

    what are these? [​IMG]
     
  16. Brian Simmons

    Brian Simmons PlowSite.com - Sponsor
    Messages: 196

    99-03 GM 1500 plates
     
  17. Im-not-guilty

    Im-not-guilty Junior Member
    from Maine
    Messages: 11

    Hey Brian
    I'm new to the site
    But not new to fisher plows
    please look at the plates above again

    They are 7168 2003-2007 classic body style gm 1500

    Those are definitely not 7160 99-02 gm 1500
     
  18. Brian Simmons

    Brian Simmons PlowSite.com - Sponsor
    Messages: 196

    Your correct. I got it backwards. The 7160 had the tabs that wrapped around the sides of frame at the rear of the plate.